1. Remove the valve core to fully deflate the tyre,
2. Fill the tyre with the correct amount of AeroPak Liquid Tyre
Suggested fill quantities
Small Cars; 500-1000ml,
Large Cars; 1000-2000ml
3. Replace the valve core, and rotate the tyre for a few minutes to
evenly spread sealant.
4. Inflate the tyre to the correct pressure, and as soon as
possible slowly drive 1-2km. The puncture / leaks will
automatically seal. Recheck tyre pressure and reinflate if needed.
IMPORTANT NOTE: The tyre’s speed of rotation/ centrifugal force after sealant
application is important to evenly distribute the sealant. Allowing
the tyre to remain stationary after filling may cause the wheel to
become unbalanced at speed. If this occurs AeroPak Liquid Tyre
Sealant will allow the vehicle to continue in an emergency at
reduced speed, however a professional tyre repair mechanic will
need to clean the tyre out with water allowing for the installation
of a proper plug/patch.
1.Do not use near fire or naked flame.
2.Do not puncture or incinerate even if empty.
3.Keep in a cool place out of direct sunlight.
4.Store in a cool, dry place 50°C. / 122 F
Keep out of reach of children If swallowed seek medical advice